FireProtect 2 SB (Heat/CO) Jeweller
Wireless combined heat and carbon monoxide detector with sealed, non-replaceable batteries.
Price on request
Supplied per order — we will confirm the lead time in the quotation.
Wireless combined heat and carbon monoxide detector with sealed, non-replaceable batteries.
Supplied per order — we will confirm the lead time in the quotation.
A wireless resettable manual call point with programmable scenarios and blue enclosure.
Wireless fire detector with smoke and heat sensors and replaceable batteries.
Wireless fire detector with smoke, heat, and carbon monoxide sensors.
Wireless combined heat and smoke detector with replaceable batteries.
Wireless combined heat, smoke, and CO detector with replaceable batteries.
Wireless combined heat and smoke detector with sealed batteries.
FireProtect 2 SB (Heat/CO) Jeweller is a wireless combined heat and carbon monoxide detector for indoor installation that works with an Ajax hub or radio signal range extender over Jeweller, at up to 1,700 m in open space. The heat sensor meets the Class A1R requirements of EN 54-5 and BS 5446-2, raising an alarm above 64 °C or when the temperature rises by more than 10 °C within a minute. The chemical CO sensor alarms on the accumulated dose (above 50 ppm within 90 minutes, above 100 ppm within 40 minutes, above 300 ppm within 3 minutes) and has a 10-year service life. A built-in siren sounds at 85 dB at 3 m, the hub raises an interconnected alarm on every fire detector in the system within 20 seconds, and LEDs show power, faults and alarms; the front button runs a test or silences an alarm. It runs on two non-replaceable lithium batteries with a 10-year battery life, mounts on a SmartBracket panel, measures 44 × 86 × 86 mm, weighs 145 g, is rated IP20 and operates from 0 to 50 °C at up to 80% humidity. It comes in black or white.
No ratings yet
Your rating
How this product lines up against others in Carbon Monoxide.
| Installation method | — | Wall, Ceiling | Ceiling |
| Link technology | Jeweller | Jeweller | Jeweller |
| Detected event | Heat, CO | Heat, CO | CO |
| Coverage pattern | Point | Point | Point |
| Security grade | Grade 2 | Grade 2 | — |
| Heat detector class | A1 | A1 | — |
| Product line | Baseline | Baseline | Baseline |
| Lifecycle status | Active | Active | Active |
| Operating temperature | 0 to 0 °C | 0 to 50 °C | 0 to 55 °C |
| IP rating | IP20 | IP20 | IP20 |
| Specification group | active | active | active |
| Device Role | Detector | Detector | Detector |
Everything about this product in one PDF, ready to print or share with your team.
No reviews yet — be the first to say what you think.
Sign in to rate it and write a comment. Your review is shown under your name.
No reviews yet — be the first to say what you think.